Laminate Sealing Machines and Food Sealing Machines in the UK

Bench Mounted Consort:

	Supplied for table top use, this constantly heated manually operated jaw sealer is designed to work 24 hours a day. The consort B M is simple in construction and offers consistant and reliable seals. Both top and bottom precision crimp pattern sealing jaws are heated, manufactured in brass for even heat distribution over the jaw length. Electronic temperature controller, monitored by a thermocouple sensor accurately maintains temperature. Consort B.M. is supplied complete with chain operated foot pedal. The option of a mechanical cable connected foot pedal is available for applications where the pedal cannot be directly located under the sealer. (refer above photograph). High quality seals can be produced on many flexible laminated films, which include coated foils, papers, nylons, polyesters, cellophane etc. Certain grades of polypropylenes can also be sealed on this subject to the jaws being coated in P.T.F.E.
This model is found typically in research labs, private hospitals, retail shops, confectionary manufacturers and beverage producers.
Features:
Both jaws heated. Brass crimp jaws for high quality seals. Electronic temperature control. Quick warm up time. Fully guarded for safety. Fast operation. Silent in operation. Low power consumption.
Technical Data:

MODEL:	250 BM
Seal Length (mm)	254
Seal Form	Longitudinal Crimp 2.4mm Pitch
Seal Width (mm)	12
Seal Height To Floor (mm)	1100 max.
Throat Depth (mm)	45
Temperature Range	0-250ºC
Warm Up Time	5 Minutes
Power Supply	230 Volts 50 Hz (115 V option)
Power Consumption (Watts)	280
Sealer Dims. Height x Depth x Width (cm)	18.5 x 24 x 32
Weight Kgs NETT	10
Weight Kgs GROSS	12

Options

Mechanical cable pedal operation.

Has the advantage of versatility over the basic chain pedal. It can be placed at any convenient point under the sealer within the limit of its one metre long cable (see inset). This feature is recommended when it is difficult for an operator to access the fixed chain pedal position. This mechanism also allows a greater seal pressure to be applied.

Non standard sealing jaws.

Generally manufactured in brass to suit an application, Flat faced, vertical crimp pattern and other profiles and pitches are available.

P.T.F.E. Coated sealing jaws.

A high temperature non stick Teflon coating is offered for working with coated Polypropylene’s and materials with a narrow sealing window. This option is also recommended for applications where it is likely that the inner coating may come into contact with the jaws.

Home Page