Rotary Sealers and Breather Bag Sealers in the UK

Major H.D. Heavy Duty (Manual)


Designed to seal wider sections of heavy gauge polythene's, co-extruded and laminated thermoplastic films e.g. Nylon/poly, Polyester/poly, etc. The Major H.D. series has both the upper and lower sealing jaws heated as standard, to ensure a quality seal. The feature of an isolator switch allows either of the sealing jaw to be turned on/off as required, when working with a variety of different thickness or types of film. Produced as a robust free standing cabinet style machine enables all machine mechanism, electrics and controls to be housed internally within the unit. Maximum seal pressure is achieved by the front facing integral foot pedal, (side action available as an option) which is linked to the sealing jaws. Controls comprise of an electronic twin timer for control over both heat and cool cycle, ensuring continuity of seal quality. Operation of the machine is simple, sealing is initiated when the jaws are closed on the film by depressing the foot pedal. A lamp indicates the duration of the seal cycle. The standard machine finish is hard wearing powder coat, colour white. Other finishes e.g stainless steel, Galvanised as well as higher levels of ingress protection i.e IP 54/65 versions available.
Features:
Both sealing jaws heated. Spring tensioned heating elements. Integral foot pedal with mechanical linkage to the sealing jaws for maximum seal pressure. Low voltage heating elements. Easy to service. Silent in operation - Visual lamp cycle indicator.
Technical Data:

MODEL:	750	1000	1250
Seal Length (mm)	750	1000	1250
Seal Height To Floor (mm)	917
Seal Width (mm)	4mm (Wider seals on application)
Seal Thickness (mm)	Max. 2 x 500 micron (2 x 2000g) Film
Jaw Opening (mm)	15 (Standard)
Cutting Length (mm)	Refer To Options
Throat Depth (mm)	50
Seal Time	Adjustable up to 10 seconds
Power Supply	230 Volts 50 Hz (115 volt option)
Power Consumption	800 W	850 W	900 W
Height x Depth x Width (cm)	92 x 35 x 118	92 x 35 x 626	92 x 35 x 626
Nett Weight (Kg)	74	94	95
Gross Weight (Kg)	104	124	125

Options

Seal Width:

Depending on application, other standard widths of seal available are 2, 6 and 8mm.

Manual Trim Facility:

Necessary where bags heights beyond the seal are to remain a constant or when making bags from layflat tubing (refer to bag making attachment below). This facility is available in two forms.

Rotary Disc Trimmer: Designed to work in front of the sealing jaws this is a Heavy duty self sharpening system (cuts full length of seal bar).
Blade Trimmer: Moulded safety cutter with spring loaded blade runs 10mm behind the seal bar (cuts a set distance between the jaw mounting arms).

Bag making attachment:

This comprises of a central core supported reel carrier (refer illustration, below) plus either of the above trimming options.

Side action foot pedal:

This factory fitted option is offered where there is no operator access to the front of the machine, sealing jaws are engaged by mechanical pedal located in the side of the cabinet.

Home Page